Route with a total movement duration of up to 15 minutes.

 These are macro recordings based on the movement of the operator, including pan, pitch, and zoom activities, which can be played back continuously. The repetition accuracy error of panning and pitching preset positions is not more than ± 0.2 degrees, so that the correct picture can be captured every time. The camera provides a horizontal speed of up to 300 degrees per second and a vertical speed of up to 200 degrees per second. The manual rotation speed (horizontal and vertical) of the camera is between 1-120 deg / s. The camera will provide a horizontal rotation range of up to 360 degrees of continuous rotation. The elevation angle of the camera is between 0 ° and ± 90 °. Intelligent dynamic noise reduction reduces bandwidth and storage requirements. The camera uses intelligent dynamic noise reduction to analyze scene content actively and reduce noise artifacts accordingly. Low noise image and efficient H.264 compression technology provide clear images. Compared with other H.264 cameras, this camera can reduce bandwidth and storage requirements by up to 50%. This enables the video stream to maintain high image quality and motion smoothness while reducing bandwidth consumption. The camera provides the most practical image by skillfully optimizing the detail bandwidth ratio. Region based coding is another feature that reduces bandwidth. You can set compression parameters for up to eight user-defined regions. This allows you to highly compress areas of interest, leaving more bandwidth for important parts of the scene. The user can configure the coding region for each configured preset (scene) in order to improve or reduce the coding quality of the optional region of the video image. These areas enhance the control of contrast specificity. Important parts of the scene (identified as targets in the GUI) are encoded in high definition, so they have enhanced coding quality. Less important parts (such as the sky and trees in the background - both identified as backgrounds in the GUI) are encoded with lower quality and therefore have reduced coding quality. Intelligent defog users can configure the mode to be activated automatically when fog is detected by the global contrast enhancement method in the camera, and add luminosity to the video image (this mode is disabled when the fog disappears or the scene changes). Advanced video streaming the camera provides a variety of advanced video streaming capabilities, so you can configure the camera to take advantage of the latest network technology. The camera is designed to provide high-quality HD video with very low network load on an efficient and powerful H.264 encoding platform. If the camera does not detect movement in the scene, the new intelligent coding function will reduce the bandwidth consumption to a very low level. The camera is capable of four bit streaming, which allows you to configure the camera to provide independently configurable video streams for live viewing, recording, or remote monitoring over bandwidth constrained networks. The video and memory management memory card (up to 32 GB microSDHC / 2 TB microsdxc) can be used for local alarm recording or scheduled local recording to improve overall recording reliability. The video management can be controlled through Bosch video recording Manager (VRM), or the iSCSI target can be directly used by the camera without any recording software. Alarm processing and motion detection can use a variety of configuration options to send camera related alarm signals. In addition, an alarm signal can be sent by a built-in algorithm for detecting movement relative to a preset position, or the camera can be connected to an external alarm source using the built-in alarm I / O port. In addition, users can also order virtual alarms. Any available external, mobile, or scheduled virtual alarms can then be used to trigger relay outputs or force the camera to perform certain tasks (e.g., starting a tour or going to a preset location). Access security supports three levels of password protection and 802.1x authentication. The SSL certificate stored in the camera can be used to protect the web browser access. An optional encryption site license is available to enable independent AES encryption of video and audio communication channels using a 128 bit key. Full featured viewing software currently has a variety of ways to access camera functions: using a web browser, using Bosch video management system, using the free Bosch video client, using the video security app or through third-party software. Bosch video security application autodome IP Camera fully supports Bosch's dynamic transcoding technology, which, combined with Bosch's video security app, allows you to remotely access camera control, live video streams, videos and HD images anytime, anywhere, regardless of available bandwidth. Dynamic transcoding automatically adjusts the bit rate based on available bandwidth to ensure smooth video streaming. When the video is suspended due to an event, the full HD still image will be displayed immediately. To get all the benefits of dynamic transcoding, simply extend the IP video surveillance system via Bosch's divar IP recording solution or Videojet XTC. The camera meets the onvif profile s specification. This ensures interoperability between network video products produced by different manufacturers. Third party integrators can easily access the camera's internal feature set for integration into large projects. For more information, visit the Bosch integrated Partner Program (IPP) website（ ipp.boschsecurity.com )。 Easy to install and maintain, the camera has been specially designed

Sales telephone (same number of wechat): 13428785305 QQ: 2461903042