New dual channel cps2.9 Mk II power amplifier brings flexibility and reliability for professional fixed installation. It is specially designed for engineers. The input and output of cps2.12 dual channel power amplifier 2U is phornix interface, which can preset power on delay. Through the built-in interface, it can realize remote startup, rear volume adjustment, and switch on and off of 50 Hz high pass filter (HPF).
Each channel can be provided separately without transformer, and the output can be switched on and off. This feature enables the special channel to establish a large output (which can realize the driving maximization). When driving 2 Ω, 4 Ω load, no transformer is needed. In high impedance operation mode, a 50 Hz high pass filter provides protection against magnetic saturation of the speaker transducer. In addition, each channel of the power amplifier can be bridged in pairs to provide multiple output power.
A variety of optional signal processing modes, including 500Hz and 800Hz frequency division modes for cinemas, XHP variable high pass modes for ZX, SX, and evid loudspeakers
Product features:
Input and output phornix interface
Preset power on delay
Remote startup can be realized through built-in interface
Rear volume adjustment
With rcm-810 remote control module expansion slot, network control function can be realized through iris net
By using the variable load driving function of rcm-810, the output power of the power amplifier can be adjusted to match the changing load. The load can be changed from 2 Ω to 10 Ω and the unit is 0.1 Ω
Technical parameters:
Output power thd = 1%, 1kHz 2 × 1250W / 2 Ω
2×900W/4Ω
2×550W/8Ω
Rated output power thd = 0.3%, 20hz-23khz 2 × 800W / 4 Ω
2×400W/8Ω
The output power of the bridge is thd = 1%, 1kHz 1 × 2500W / 4 Ω
1×1800W/8Ω
Large RMS voltage amplitude thd = 1%, 1kHz, channel 78.8v
Power supply width thd = 1%, 1kHz, 10hz-30khz
Voltage gain, 1kHz 32dB
Distortion (rated output power), MBW = 80kHz, 1kHz < 0.03%

Intermodulation distortion, 60 Hz, 7 kHz < 0.1%

DIM30，* kHz，15 kHz <0.05%

High input volume (level) + 21dbu

Crosstalk (rated power) 300

Voltage compliance rate 27V / us

Output SNR, A-weighted < - 71dbu

Amplifier type H

Power consumption, 1 / 8 high output power 700W

Required (240V, 100Hz; 240V, 100Hz)

Protection audio limiting, overheating, DC, high frequency short circuit, peak current protection, surge protection, startup delay
Cooling front rear 3-stage speed fan
Ambient temperature + 5 ° C - + 40 ° C (40 ° F - 105 ° f)
Safety level 1
Overall dimension (w × h × d) 483 × 88.1 × 421.5mm

Net weight 16.3kg

Sales telephone (same number of wechat): 13428785305 QQ: 2461903042