These radiators are used to transmit infrared signals throughout the conference hall, making it easy to listen to the proceedings from a personal pocket receiver. Basic function, general power equipment suitable for use in the world, no fan, through natural convection cooling, make operation more quiet, easy to wear and tear parts of less, the LED light is used to examine the state of radiator, radiator and transmission between the can communication, convenient for operating personnel check, can be in transmitter automatically open when it is open, and vice versa, automatic cable is balanced, to ensure that all sorts of quality of the cable to keep maximum transmission efficiency, automatic cable termination, Simplify the installation, temperature protection circuit can be automatically during high temperature radiator from the power switch to the half power, adjustable Angle of radiator, to ensure maximum coverage, IRED by cover protection, easy to maintain and cleaning device, a dramatic fashion design control and indicator light, two yellow LED indicator light: each radiator panel a, indicating this panel has been opened and is from the transmitter to receive carrier, 2 red LED indicator light: Each radiator panel a, indicating this panel is in standby mode, red and yellow LED indicator lights flashing at the same time show the radiator panel there fault, red LED indicator lights flashing and yellow LED light said radiator panel is under a state of temperature protection, reduce the power switch, is used for reducing the output power of the radiator to half power, two switch, delay compensation for compensation cable length difference between transmitter and radiator interconnection, convex type European socket to power connection, HF input and output connector (2 x BNC), Used to connect to the transmitter and the loop is connected to the other radiator accessories quantity component 1 LBB 451 x / 00 Integrus radiant panel power line 1 to install on the ceiling of the bracket for mounting on a floor stand 2 tablet technical specification of electric power supply voltage 100-240 Vac, 50 to 60 Hz power LBB 4511, 100, operating 100 W LBB standby LBB 4512 8 W, 180 W LBB 4512 operation, Standby 10 W IRED LBB LBB 4511 4511 4512 480 total peak intensity LBB 4511 12 W / 24 W/sr sr LBB 4512 half strong Angle of plus or minus 22 ° HF input rated 1 Vpp, minimum 10 mVpp machinery installation, used for hanger directly installed on the ceiling. · install the flat panel of the landing bracket using M10 and 1/2 inch wyeth thread. • optional wall mounting bracket (LBB 3414/00) is provided. • safe eyes. Size (high) x width x thick LBB 4511 excluding bracket 200 x 500 x 200 mm (7.9 x 19.7 x 6.9 inches) LBB 4512 excluding bracket 300 x 500 x 300 mm (11.0 x 19.7 x 6.9 inches) floor radiant panel Angle bracket installation 0, 15, and 30 ° wall/ceiling installation 0, 15, 30, 45, 60, 75 and 90 ° weight LBB 4511 bracket 6.8 kg (15 pounds) LBB contains 4511 bracket 7.6 kg (17 pounds) LBB 4512 excluding bracket 9.5 kg (21 LBS LBB 4512 contains bracket order 10.3 kg (23 pounds) bronze color information in 4511/00 LBB Integrus radiation board Integrus power radiation plate can cover up to 1300 square meters (13993 square feet). The integrated us radiant panel, lbb4511/00 LBB 4512/00, is available for maximum coverage of 2,600 square metres (27,986 square feet). LBB 4511/00 - US Integrus radiation plate (US) in the order number lbb4512/00 can cover up to 1300 square meters (13,993 square feet). The American version. The lbb4511/00-us LBB 4512/00‑US integrated US radiant panel (US) can cover up to 2,600 square metres (27,986 square feet). The American version. LBB 3414/00 wall mounting frame of hardware accessory LBB 3412/00 is applicable to LBB 3414/00 wall mounting bracket of radiant panel. The lbb3414/00 INT‑FCRAD radiator portable box can contain an INT - FCRAD portable box with 1 radiating panel. Order number INT - FCRAD